|
|
Click to see brochure
 |
|
 |
|
MODEL 46 - DUAL STRAND CHAIN CONVEYOR
Live roller conveyor require loads
with smooth, flat bottom surfaces. Pallet bottom boards must be
parallel to direction of flow. If product orientation is a concern,
notify distributor. Model 46 - Dual Strand Chain Conveyor are used typically
for heavy duty, pallet loads, and transport. |
Model 46
Dual (2) Strand
Chain Pallet Conveyor
Model 46
With Center Rollers (Model 48) |
|
|
Back to contents |
|
MODEL 47 - ROLL-TO-ROLL ZERO PRESSURE ACCUMULATING
Live roller conveyor require loads
with smooth, flat bottom surfaces. Pallet bottom boards must be
parallel to direction of flow. If product orientation is a concern,
notify distributor. Model 47 - Roll-To-Roll Zero Pressure Accumulating conveyor
are used typically for heavy duty, unit loads, unitized loads, pallet
loads, transport, and accumulation. |
Model 47
Roll-to-Roll
Chain Driven
Zero Pressure
Accumulating Conveyor |
 |
|
Back to contents |
|
MODEL 48/49 - ROLL-TO-ROLL CHAIN DRIVEN CONVEYOR
Live roller conveyor require loads
with smooth, flat bottom surfaces. Pallet bottom boards must be
parallel to direction of flow. If product orientation is a concern,
notify distributor. Model 48/49 - Roll-To-Roll Chain Driven Conveyor are
used typically for heavy duty, unit loads, unitized loads, pallet loads,
and transport. |
Model 48
Roll-to-Roll
Chain Driven
Live Roller Conveyor |
 |
|
Back to contents |
|
MODEL 68/69 - PALLET TURNTABLE
Live roller conveyor require loads
with smooth, flat bottom surfaces. Pallet bottom boards must be
parallel to direction of flow. If product orientation is a concern,
notify distributor. Model 68/69 - Roll-To-Roll Chain Driven Conveyor
are used typically for heavy duty, unit loads, unitized loads,
pallet loads, and sortation. |
Model 68 - Pallet Turntable |
 |
|
Back to contents |
|
ACCESSORIES FOR PALLET HANDLING CONVEYOR
Channel-End Stops:
|
|
Back to contents |
|
Heavy Duty "H" Series Supports:
Frame: 10 gauge welded formed steel construction.
Pivot Plates: 35 degree adjustable standard.
Floor Anchors: Holes for 1/2" anchor bolts are provided in support feet.
|
"H" Series
Capacity
3000# Ea. |
 |
|
Back to contents |
|
|
Angle Guard Rails - Leg In and Leg Out, Both. 1-1/2" x 1-1/2" x 12 gauge.
Fixed Channel Guard Rails - Straight channel and curved channel.
Straight - 3-1/2" x 1-1/2" x 10 ga. both sides.
Curved - 90 or 45 degree, inside, outside, or both sides. |
|
Back to contents |
|
1. - Holes for 3/8 Hardware will need to be added to channels at assembly or field fit.
2. - Air pressure of 60 PSI required.
3. - Air cushion adjustment (Uniflo factory set). Turn screws all the way in and one turn out.
|
|
Back to contents |
|
LOAD DESCRIPTIONS FOR PALLET HANDLING |
Several types and configurations of loads can be successfully conveyed on conventional
Advanced Uniflo Technologies heavy duty conveyor equipment. General descriptions of
some of these types of loads are listed below. Following each description is the suggested
Advanced Uniflo Technologies equipment that is, under general conditions, appropriate to
handle these types of loads.
|
1. Unit Loads
Individual unit loads such as cartons, boxes, tote boxes, drums, and containerized loads.
 .. ..
|
Suggested Equipment
All Advanced Uniflo models, except the Model 46 Chain Conveyor, can be
applied. The most efficient application for transportation would be Models 48/49.
The use of Models 58/59 (straight roller curves) should be restricted to applications
where load orientation is not important, such as drum handling. Both in-the-frame and
through-the-frame transfers and turntables can be applied. (See Pallet Handling
Curves and Transfer Brochure for more details.)
|
|
2. Unitized Loads
Groups, stacks and/or patterned layers of unit loads.
|
Suggested Equipment
Unless the unit size is very large, the unitezed loads should be on a pull sheet.
Models 47, 48/49, and 68/69 can be applied when close roll centers are
specified. If less than 4" roll centers are required for Models 48/49 and 68/69, it
will be necessary to have roll-to-roll chain drives on both sides of the conveyor.
This will require a chain box on each side of the conveyor, thus limiting access for
loading/unloading and narrowing the effective width of the conveyor.
|
|
Back to contents |
|
3. Pallet Loads
Unitized loads or single large unit loads on pallets or plywood sheets.
 . |
Suggested Equipment
All Advanced Uniflo Technologies models can be applied when pallets are in good
condition and have bottom boards that are parallel to the direction of travel. In
the absence of bottom boards, the pallet stringers must be in the direction of
travel. When the bottom boards are at right angles to the direction of flow,
Advanced Uniflo Technologies Model 46 is preferred. When conveying loads on
plywood sheets (somethimes referred to as slave pallets), all Advanced Uniflo
Technologies models can be applied.
|
|
|
Back to contents |
|